Use
AquaMaker is best added to the tap water used for the water change. Only use the dose for the
volume of this new tap water. Thus, aggressive substances are immediately neutralized.
AquaMaker can of course also be added directly to the aquarium. In this case, base the dosage
on the total volume of the aquarium water.
Water treatment
Fresh and Salt
Example: dosing to an aquarium
An aquarium has a water volume of 100 liters and 20 liters of water is changed. The dosage of
AquaMaker is for the full water content, in this case 100 liters. The addition to the aquarium
water should be 20 ml of AquaMaker.
Deviating dosages – concentrations of chloramine, chlorine and nitrite & water
temperature higher as 30 ºC. Shake before use. The product may release a sulfur odor.
standard dosage (water change) | 10 ml per 50 liters |
low concentrations chlorine, chloramine or ammonia | 5 ml per 50 liters |
high concentrations chlorine, chloramine or ammonia | 20 ml per 50 liters |
very high nitrite concentrations (3 mg/l or higher) | 30 ml per 50 liters |
very high ammonia concentrations (1 mg/l or higher) | 30 ml per 50 liters |
water temperature above 30 ºC (dosage: half te | 5 ml per 50 liters |