API pH Test Strips, 25 count
Use the API® pH TEST STRIPS as a quick and accurate way to test pH levels in your water. These test strips measure a wide range of pH, from 6.0 to 9.0 ppm, to help you keep aquarium conditions safe for your fish. Product comes with desiccant-lined tube with snap-tight cap, highly precise color chart for accurate water parameter readings, and information on how to correct unsafe water conditions. For use in fresh and saltwater aquariums. Size: 25 pcs per box.
د.إ58.00
Related products
-
TEST KITS, Fresh Water
EASYLIFE POTASSIUM TEST KIT
0 out of 5(0)Potassium: at least as important as iron!
Potassium is a macronutrient and at least as important as iron for a good and healthy plant growth. Therefore it is important to check the level of potassium to prevent too low levels and keep them in a healthy range ( 10-15 mg/l). The Easy-Life Potassium test is a color test with a color chart.
Optimum level for a planted aquarium
Aquarium plants benefit from 10 -15 mg/l (=ppm) of potassium. A level below 5 mg/l (=ppm) is not desirable and can lead to growth problems, yellowing of the leafs and deformations, Often lack of potassium is confused with lack of iron, also because potassium was very difficult to measure until now. If the level is too low, extra potassium will help the plants te recover soon and they will color deep green.
- Easy-Life Potassium (K) testkit
- user-friendly and reliable
- color test with color test with easy-to-read color chart
- Measuring range from 0 to 25 mg/l (ppm) Potassium
- 1 testkit accounts for 50 tests
SKU: TPF 01 -
Sold out!TEST KITS, Fresh Water, Marine
API Ammonia NH3/NH4 Test Strips, 25 count
0 out of 5(0)Use the API® AMMONIA TEST STRIPS as the quick and accurate way to test for the presence of ammonia. Kit reads 0 to 6 ppm of ammonia, and alerts you to unsafe ammonia levels before they can harm fish or result in fish loss.
Size: 25pcs per box
SKU: AI33D -
TEST KITS, Fresh Water
JBL ProAquaTest Easy 7in1
0 out of 5(0)Size: Unit
Test strips for quick aquarium water testing.
Key Features:
- Test strips for testing 7 important water values in 1 minute: quick test for general guidance when testing aquarium, pond, well and tap water
- Easy to use: Move the test strip in the water for 2-3 seconds. Remove the test strip. Let the water drain off sideways. Compare the test strip with the colour scale on the packaging after 1 minute. Read off the CO2 value in the table
- Determines the following water values: chlorine, acidity (pH), general hardness (GH), toxic nitrite compound (NO2), cause of algae (NO3), pH stability (KH) and main plant nutrient (CO2 content using the table)
- Further tests for phosphate or ammonium/ammonia etc. are available as individual tests in the JBL program
SKU: JB2414400 -
TEST KITS, Fresh Water
EASYLIFE PHOSPHATE TEST KIT
0 out of 5(0)Very sensitive and easy to perform Phosphate water test
The very sensitive and accurate Easy-Life Phosphate testkit is suitable for fresh water and marine aquariums. There are two different ranges within the testkit. A low range from 0.00 – 0.10 mg/l (ppm) and high range from 0 – 2.5 mg/l (ppm). The Easy-Life Phosphate water test only needs 1 reagens!
Easy-Life Phosphate PO4 test
- suitable for fresh water and marine aquariums
- easy to use, reliable and ultra sensitive
- colortest, easy to compare with a color chart
- PO4 detectable from 0.01 mg/l (=ppm)
- low range: 0,00 – 0,02 – 0,04 – 0,06 – 0,08 – 0,10 mg/l (=ppm)
- high range: 0,0 – 0,5 – 1,0 – 1,5 – 2,0 – 2,5 mg/l (=ppm)
- testkit accounts for 75 tests
Note: For a phosphate content above 2.5 mg/l (=ppm) the water sample from the aquarium can be cut with water without phosphate (distilled water, RO water or tap water often). The PO4 concentration higher than 2.5 mg/l can be determined.
SKU: TPH 01