API pH Test Strips, 25 count
Use the API® pH TEST STRIPS as a quick and accurate way to test pH levels in your water. These test strips measure a wide range of pH, from 6.0 to 9.0 ppm, to help you keep aquarium conditions safe for your fish. Product comes with desiccant-lined tube with snap-tight cap, highly precise color chart for accurate water parameter readings, and information on how to correct unsafe water conditions. For use in fresh and saltwater aquariums. Size: 25 pcs per box.
د.إ58.00
CompareRelated products
-
TEST KITS, Fresh Water
JBL ProAquaTest NH4 Ammonium +
0 out of 5(0)- Simple and reliable monitoring of ammonium (NH4) and ammonia (NH3) in aquariums/ponds. Checks the biological balance (bacterial activity) in freshwater and marine water.
- Laboratory comparator system to compensate the inherent water colour: fill glass vials with sample water, add reagents to one vial, place vials in holder, read values off colour chart and table.
- Use: when setting up a new freshwater aquarium: once a day. Initial setup with marine water: once a week. For use in case of fish diseases or fish deaths.
- You will find detailed information and troubleshooting tips about water analysis on the JBL website in Essentials/Aquarium or Pond.
- Package contents: 1 quick test, ammonium test NH4 for approx. 50 measurements. Incl. 3 reagents, 2 glass vials with screw caps, syringe, comparator block and colour scale. Reagent refill separately available.
SKU: JB2412117د.إ70.00 -
TEST KITS, Fresh Water
EASYLIFE PHOSPHATE TEST KIT
0 out of 5(0)Very sensitive and easy to perform Phosphate water test
The very sensitive and accurate Easy-Life Phosphate testkit is suitable for fresh water and marine aquariums. There are two different ranges within the testkit. A low range from 0.00 – 0.10 mg/l (ppm) and high range from 0 – 2.5 mg/l (ppm). The Easy-Life Phosphate water test only needs 1 reagens!
Easy-Life Phosphate PO4 test
- suitable for fresh water and marine aquariums
- easy to use, reliable and ultra sensitive
- colortest, easy to compare with a color chart
- PO4 detectable from 0.01 mg/l (=ppm)
- low range: 0,00 – 0,02 – 0,04 – 0,06 – 0,08 – 0,10 mg/l (=ppm)
- high range: 0,0 – 0,5 – 1,0 – 1,5 – 2,0 – 2,5 mg/l (=ppm)
- testkit accounts for 75 tests
Note: For a phosphate content above 2.5 mg/l (=ppm) the water sample from the aquarium can be cut with water without phosphate (distilled water, RO water or tap water often). The PO4 concentration higher than 2.5 mg/l can be determined.
SKU: TPH 01د.إ57.00 -
TEST KITS, Fresh Water, Marine
API Nitrite NO2 Test Kit, 180-count
0 out of 5(0)Nitrite is produced in the aquarium in the forms of fish waste, uneaten food, and by nitrifying bacteria in your aquarium’s natural cycle as it breaks down ammonia. Low levels of nitrite inhibit respiration and suppress the immune system, while high levels cause suffocation in fish.
The API® NITRITE TEST KIT reads nitrite levels quickly and accurately in your tank, and tests parameters from 0 to 5 ppm.
Contains 180 tests and includes 1 test solution, easy-to-ready instructions, glass test tube and color chart.
SKU: AI26د.إ52.00 -
Sold out!TEST KITS, Marine
JBL ProAquaTest Lab Marin
0 out of 5(0)JBL ProAquaTest Lab Marin
Monitors the water values in marine aquariums simply and reliably. Determines: pH value, carbonate hardness, calcium, magnesium, copper, ammonium, nitrite, nitrate, phosphate, silicate, oxygen.
Easy to use: add water to cuvette, add indicator, compare on scale / count drops until colour changes.
Comparator system takes the inherent water colouring into account. Incl. water analysis report sheets & pen.
Childproof reagent bottles, waterproof plastic case, refill reagents separately available.
Package contents: 1 test case, incl. 29 reagents, 12 glass vials, 2 plastic cuvettes, 2 syringes, 3 measuring spoons, thermometer, pen, report sheets and analysis sheet, laboratory comparator system & detailed instruction for use.SKU: JB2408200د.إ449.00