EASYLIFE POTASSIUM TEST KIT
Potassium: at least as important as iron!
Potassium is a macronutrient and at least as important as iron for a good and healthy plant growth. Therefore it is important to check the level of potassium to prevent too low levels and keep them in a healthy range ( 10-15 mg/l). The Easy-Life Potassium test is a color test with a color chart.
Optimum level for a planted aquarium
Aquarium plants benefit from 10 -15 mg/l (=ppm) of potassium. A level below 5 mg/l (=ppm) is not desirable and can lead to growth problems, yellowing of the leafs and deformations, Often lack of potassium is confused with lack of iron, also because potassium was very difficult to measure until now. If the level is too low, extra potassium will help the plants te recover soon and they will color deep green.
- Easy-Life Potassium (K) testkit
- user-friendly and reliable
- color test with color test with easy-to-read color chart
- Measuring range from 0 to 25 mg/l (ppm) Potassium
- 1 testkit accounts for 50 tests
د.إ78.00
Compare
Brand
EasyLife
Related products
-
TEST KITS, Fresh Water
EASYLIFE PHOSPHATE TEST KIT
Very sensitive and easy to perform Phosphate water test
The very sensitive and accurate Easy-Life Phosphate testkit is suitable for fresh water and marine aquariums. There are two different ranges within the testkit. A low range from 0.00 – 0.10 mg/l (ppm) and high range from 0 – 2.5 mg/l (ppm). The Easy-Life Phosphate water test only needs 1 reagens!
Easy-Life Phosphate PO4 test
- suitable for fresh water and marine aquariums
- easy to use, reliable and ultra sensitive
- colortest, easy to compare with a color chart
- PO4 detectable from 0.01 mg/l (=ppm)
- low range: 0,00 – 0,02 – 0,04 – 0,06 – 0,08 – 0,10 mg/l (=ppm)
- high range: 0,0 – 0,5 – 1,0 – 1,5 – 2,0 – 2,5 mg/l (=ppm)
- testkit accounts for 75 tests
Note: For a phosphate content above 2.5 mg/l (=ppm) the water sample from the aquarium can be cut with water without phosphate (distilled water, RO water or tap water often). The PO4 concentration higher than 2.5 mg/l can be determined.
SKU: TPH 01 -
TEST KITS, Fresh Water
API 5-IN-1 Test Strips 25 Count
API® 5-IN-1 TEST STRIPS are the quick and easy way to test the 5 most important aquarium water parameters – pH, KH, GH, nitrate, and nitrite – in one easy step.
Simply dip one test strip directly into the aquarium, and compare the colors on the strip to the color card provided to help prevent invisible water problems that can be harmful to fish.
Each kit includes detailed information on how to interpret the test results and correct unsafe water conditions.
Size: 25pcs per box
SKU: AI33G -
TEST KITS, Fresh Water, Marine
API Nitrite NO2 Test Kit, 180-count
Nitrite is produced in the aquarium in the forms of fish waste, uneaten food, and by nitrifying bacteria in your aquarium’s natural cycle as it breaks down ammonia. Low levels of nitrite inhibit respiration and suppress the immune system, while high levels cause suffocation in fish.
The API® NITRITE TEST KIT reads nitrite levels quickly and accurately in your tank, and tests parameters from 0 to 5 ppm.
Contains 180 tests and includes 1 test solution, easy-to-ready instructions, glass test tube and color chart.
SKU: AI26 -
Sold out!TEST KITS, Fresh Water, Marine
API Nitrate NO3 Test Kit, 90 count
High nitrate levels in your aquarium indicate a build-up of fish waste and organic compounds, resulting in poor water quality and an increase in algae growth. Contrarily, maintaining a low nitrate level improves the health of fish and invertebrates.
Use the API® NITRATE TEST KIT to ensure that the nitrate levels in your tank are safe and healthy for your fish.
The NITRATE TEST KIT reads parameters from 0 to 160 ppm and may be used for both fresh and saltwater aquariums.
Contains 90 tests and includes 2 test solutions, easy-to-ready instructions, glass test tube and color chart.
SKU: AILR1800
