Seachem Alerts Combo Pack 6 Month
The Alert Combo pack combines Ammonia Alert (1 card) and pH Alert® (1 card). Ammonia Alert and pH Alert are almost half the size of competing products. At 1.5″ x 2.5″, they are small, clear, and unobtrusive, so they won’t detract from the view of your aquarium. Simply place Ammonia Alert and pH Alert visibly anywhere in the aquarium or filter. It’s that easy. No chemicals or test procedures are required.
د.إ52.00
Related products
-
TEST KITS, Fresh Water
JBL ProAquaTest Easy 7in1
0 out of 5(0)Size: Unit
Test strips for quick aquarium water testing.
Key Features:
- Test strips for testing 7 important water values in 1 minute: quick test for general guidance when testing aquarium, pond, well and tap water
- Easy to use: Move the test strip in the water for 2-3 seconds. Remove the test strip. Let the water drain off sideways. Compare the test strip with the colour scale on the packaging after 1 minute. Read off the CO2 value in the table
- Determines the following water values: chlorine, acidity (pH), general hardness (GH), toxic nitrite compound (NO2), cause of algae (NO3), pH stability (KH) and main plant nutrient (CO2 content using the table)
- Further tests for phosphate or ammonium/ammonia etc. are available as individual tests in the JBL program
SKU: JB2414400 -
TEST KITS, Fresh Water
EASYLIFE PHOSPHATE TEST KIT
0 out of 5(0)Very sensitive and easy to perform Phosphate water test
The very sensitive and accurate Easy-Life Phosphate testkit is suitable for fresh water and marine aquariums. There are two different ranges within the testkit. A low range from 0.00 – 0.10 mg/l (ppm) and high range from 0 – 2.5 mg/l (ppm). The Easy-Life Phosphate water test only needs 1 reagens!
Easy-Life Phosphate PO4 test
- suitable for fresh water and marine aquariums
- easy to use, reliable and ultra sensitive
- colortest, easy to compare with a color chart
- PO4 detectable from 0.01 mg/l (=ppm)
- low range: 0,00 – 0,02 – 0,04 – 0,06 – 0,08 – 0,10 mg/l (=ppm)
- high range: 0,0 – 0,5 – 1,0 – 1,5 – 2,0 – 2,5 mg/l (=ppm)
- testkit accounts for 75 tests
Note: For a phosphate content above 2.5 mg/l (=ppm) the water sample from the aquarium can be cut with water without phosphate (distilled water, RO water or tap water often). The PO4 concentration higher than 2.5 mg/l can be determined.
SKU: TPH 01 -
TEST KITS, Fresh Water, Marine
API 5-IN-1 Test Strips 4 Count
0 out of 5(0)API® 5-IN-1 TEST STRIPS are the quick and easy way to test the 5 most important aquarium water parameters – pH, KH, GH, nitrate, and nitrite – in one easy step.
Simply dip one test strip directly into the aquarium, and compare the colors on the strip to the color card provided to help prevent invisible water problems that can be harmful to fish.
Each kit includes detailed information on how to interpret the test results and correct unsafe water conditions.
Size: 4pcs per box
SKU: AI33H -
FISH CARE, Fish Neutrients, Water Conditioner, Fresh Water, TEST KITS, Fresh Water
SEACHEM pH ALERT
0 out of 5(0)Size: UnitpH Alert is a unique color device designed to be placed in the aquarium or filter and monitor pH continuously. A sensor changes color reversibly from yellow to orange to red alerting you to shifts in pH levels between 5.4 and 8.0. Freshwater use only.
KEY FEATURES:
- Continuously monitors pH in freshwater
- Seachem sensor technology
- No tests, no strips
- Lasts up to 4 times as long as competing products
SKU: SE20