API pH Test Strips, 25 count
Use the API® pH TEST STRIPS as a quick and accurate way to test pH levels in your water. These test strips measure a wide range of pH, from 6.0 to 9.0 ppm, to help you keep aquarium conditions safe for your fish. Product comes with desiccant-lined tube with snap-tight cap, highly precise color chart for accurate water parameter readings, and information on how to correct unsafe water conditions. For use in fresh and saltwater aquariums. Size: 25 pcs per box.
د.إ58.00
CompareRelated products
-
Sold out!TEST KITS, Fresh Water, Marine
API Phosphate PO4 Freshwater & Saltwater Aquarium Test Kit, 150 count
Phosphate can enter your aquarium through tap water, fish waste, and decaying organics such as uneaten food and dead algae. Excess phosphate contributes to unsightly algae and green water blooms, and in saltwater, excess phosphate can inhibit the growth of hard corals.
The API® PHOSPHATE TEST KIT tests phosphate levels from 0 to 10 ppm so that you can easily monitor the condition of your aquarium water and may be used in both fresh and saltwater aquariums.
Contains 150 tests and includes 2 test solutions, easy-to-ready instructions, glass test tube and 2 color charts.
SKU: AI63L -
TEST KITS, Fresh Water
JBL ProAquaTest Easy 7in1
Size: Unit
Test strips for quick aquarium water testing.
Key Features:
- Test strips for testing 7 important water values in 1 minute: quick test for general guidance when testing aquarium, pond, well and tap water
- Easy to use: Move the test strip in the water for 2-3 seconds. Remove the test strip. Let the water drain off sideways. Compare the test strip with the colour scale on the packaging after 1 minute. Read off the CO2 value in the table
- Determines the following water values: chlorine, acidity (pH), general hardness (GH), toxic nitrite compound (NO2), cause of algae (NO3), pH stability (KH) and main plant nutrient (CO2 content using the table)
- Further tests for phosphate or ammonium/ammonia etc. are available as individual tests in the JBL program
SKU: JB2414400 -
TEST KITS, Fresh Water
JBL Easy Test 6-in-1
Size: 300 testsTest strips for quick aquarium water testing.
Key Features:
• Test strips for testing 6 important water values in 1 minute: quick test for aquarium, pond, well and tap water.
• Easy To use: Move the test strip in water for 2-3 seconds. Take test strip out of water. Drain off the water horizontally. After 1 minute: compare test strip with colour scale on the package.
• Determination of following values; chlorine, acidity (pH), general hardness (GH), nitrite (NO2), nitrate (NO3) and carbonate hardness (KH) of the water.
• Quick test to outline the water conditions – orientation test in 1 minute.SKU: JB2533900 -
TEST KITS, Fresh Water
EASYLIFE POTASSIUM TEST KIT
Potassium: at least as important as iron!
Potassium is a macronutrient and at least as important as iron for a good and healthy plant growth. Therefore it is important to check the level of potassium to prevent too low levels and keep them in a healthy range ( 10-15 mg/l). The Easy-Life Potassium test is a color test with a color chart.
Optimum level for a planted aquarium
Aquarium plants benefit from 10 -15 mg/l (=ppm) of potassium. A level below 5 mg/l (=ppm) is not desirable and can lead to growth problems, yellowing of the leafs and deformations, Often lack of potassium is confused with lack of iron, also because potassium was very difficult to measure until now. If the level is too low, extra potassium will help the plants te recover soon and they will color deep green.
- Easy-Life Potassium (K) testkit
- user-friendly and reliable
- color test with color test with easy-to-read color chart
- Measuring range from 0 to 25 mg/l (ppm) Potassium
- 1 testkit accounts for 50 tests
SKU: TPF 01
