API KH Carbonate Hardness Test Kit
The API® KH TEST KIT tests fresh or saltwater aquariums for carbonate hardness (KH), and helps monitor water quality and prevent invisible water problems that can be harmful to fish and plants.
Carbonate hardness stabilizes aquarium pH, and can be used to determine the proper dose of pH buffers.
Contains 1 test bottle, easy-to-ready instructions, glass test tube and color chart.
د.إ32.30 د.إ38.00
Brand
API
Related products
-
TEST KITS, Fresh Water
JBL ProAquaTest Easy 7in1
Size: Unit
Test strips for quick aquarium water testing.
Key Features:
- Test strips for testing 7 important water values in 1 minute: quick test for general guidance when testing aquarium, pond, well and tap water
- Easy to use: Move the test strip in the water for 2-3 seconds. Remove the test strip. Let the water drain off sideways. Compare the test strip with the colour scale on the packaging after 1 minute. Read off the CO2 value in the table
- Determines the following water values: chlorine, acidity (pH), general hardness (GH), toxic nitrite compound (NO2), cause of algae (NO3), pH stability (KH) and main plant nutrient (CO2 content using the table)
- Further tests for phosphate or ammonium/ammonia etc. are available as individual tests in the JBL program
SKU: JB2414400 -
TEST KITS, Fresh Water
EASYLIFE PHOSPHATE TEST KIT
Very sensitive and easy to perform Phosphate water test
The very sensitive and accurate Easy-Life Phosphate testkit is suitable for fresh water and marine aquariums. There are two different ranges within the testkit. A low range from 0.00 – 0.10 mg/l (ppm) and high range from 0 – 2.5 mg/l (ppm). The Easy-Life Phosphate water test only needs 1 reagens!
Easy-Life Phosphate PO4 test
- suitable for fresh water and marine aquariums
- easy to use, reliable and ultra sensitive
- colortest, easy to compare with a color chart
- PO4 detectable from 0.01 mg/l (=ppm)
- low range: 0,00 – 0,02 – 0,04 – 0,06 – 0,08 – 0,10 mg/l (=ppm)
- high range: 0,0 – 0,5 – 1,0 – 1,5 – 2,0 – 2,5 mg/l (=ppm)
- testkit accounts for 75 tests
Note: For a phosphate content above 2.5 mg/l (=ppm) the water sample from the aquarium can be cut with water without phosphate (distilled water, RO water or tap water often). The PO4 concentration higher than 2.5 mg/l can be determined.
SKU: TPH 01 -
TEST KITS, Fresh Water, Marine
API Nitrite NO2 Test Kit, 180-count
Nitrite is produced in the aquarium in the forms of fish waste, uneaten food, and by nitrifying bacteria in your aquarium’s natural cycle as it breaks down ammonia. Low levels of nitrite inhibit respiration and suppress the immune system, while high levels cause suffocation in fish.
The API® NITRITE TEST KIT reads nitrite levels quickly and accurately in your tank, and tests parameters from 0 to 5 ppm.
Contains 180 tests and includes 1 test solution, easy-to-ready instructions, glass test tube and color chart.
SKU: AI26 -
Sold out!TEST KITS, Fresh Water
EASYLIFE TEST STRIPS 6IN1
The numbers tell the tale
In order to achieve an optimal situation in an aquarium, it is extremely important to regularly test the water quality. The Easy-Life 6in1 Test Strips are quick to use and extremely accurate.
The Easy-Life 6in1 Test Strips give you the results to six important water parameters within 60 seconds.
The following six important water parameters are measured:
- Acidity level pH
- Carbonate hardness KH
- Total hardness GH
- Chlorine (Cl)
- Nitrite concentration NO2
- Nitrate concentration NO3
Packaging quantities
50 strips per packaging.
SKU: TST 61
