-
×
Crystal Red Bee Shrimp
1 × د.إ25.00 -
×
Dymax Activated Carbon 500g
1 × د.إ22.00
Subtotal: د.إ47.00
Fresh Water, Marine, TEST KITS
Seachem Alerts Combo Pack 6 Month
The Alert Combo pack combines Ammonia Alert (1 card) and pH Alert® (1 card). Ammonia Alert and pH Alert are almost half the size of competing products. At 1.5″ x 2.5″, they are small, clear, and unobtrusive, so they won’t detract from the view of your aquarium. Simply place Ammonia Alert and pH Alert visibly anywhere in the aquarium or filter. It’s that easy. No chemicals or test procedures are required.
د.إ52.00
Brand
SEACHEM
Related products
-
TEST KITS, Fresh Water
API pH Freshwater Aquarium Test Kit, 250 count
The API® pH TEST KIT monitors pH to maintain healthy freshwater conditions in your tank. pH control is imperative to prevent the harmful effects of overly alkaline or acidic aquarium water on fish and plant life, so take a few minutes each week to maintain and monitor your pH conditions with this easy-to-use kit!
Tests read pH from 6.0 – 7.6, and will help you quickly and easily determine whether your levels are too high or too low.
Contains 250 tests and includes 1 test bottle, easy-to-ready instructions, glass test tube and color chart.
SKU: AI28 -
TEST KITS, Fresh Water
EASYLIFE PHOSPHATE TEST KIT
Very sensitive and easy to perform Phosphate water test
The very sensitive and accurate Easy-Life Phosphate testkit is suitable for fresh water and marine aquariums. There are two different ranges within the testkit. A low range from 0.00 – 0.10 mg/l (ppm) and high range from 0 – 2.5 mg/l (ppm). The Easy-Life Phosphate water test only needs 1 reagens!
Easy-Life Phosphate PO4 test
- suitable for fresh water and marine aquariums
- easy to use, reliable and ultra sensitive
- colortest, easy to compare with a color chart
- PO4 detectable from 0.01 mg/l (=ppm)
- low range: 0,00 – 0,02 – 0,04 – 0,06 – 0,08 – 0,10 mg/l (=ppm)
- high range: 0,0 – 0,5 – 1,0 – 1,5 – 2,0 – 2,5 mg/l (=ppm)
- testkit accounts for 75 tests
Note: For a phosphate content above 2.5 mg/l (=ppm) the water sample from the aquarium can be cut with water without phosphate (distilled water, RO water or tap water often). The PO4 concentration higher than 2.5 mg/l can be determined.
SKU: TPH 01 -
Sold out!TEST KITS, Fresh Water, Marine
API Phosphate PO4 Freshwater & Saltwater Aquarium Test Kit, 150 count
Phosphate can enter your aquarium through tap water, fish waste, and decaying organics such as uneaten food and dead algae. Excess phosphate contributes to unsightly algae and green water blooms, and in saltwater, excess phosphate can inhibit the growth of hard corals.
The API® PHOSPHATE TEST KIT tests phosphate levels from 0 to 10 ppm so that you can easily monitor the condition of your aquarium water and may be used in both fresh and saltwater aquariums.
Contains 150 tests and includes 2 test solutions, easy-to-ready instructions, glass test tube and 2 color charts.
SKU: AI63L -
TEST KITS, Fresh Water, Marine
API Nitrite NO2 Test Kit, 180-count
Nitrite is produced in the aquarium in the forms of fish waste, uneaten food, and by nitrifying bacteria in your aquarium’s natural cycle as it breaks down ammonia. Low levels of nitrite inhibit respiration and suppress the immune system, while high levels cause suffocation in fish.
The API® NITRITE TEST KIT reads nitrite levels quickly and accurately in your tank, and tests parameters from 0 to 5 ppm.
Contains 180 tests and includes 1 test solution, easy-to-ready instructions, glass test tube and color chart.
SKU: AI26
