Dark Light

Co2Art Regulator PRO-SE Series – W21.8×14

Buy co2art regulator now available online for delivery in Dubai, Abu Dhabi, Sharjah and all over UAE.

Co2Art PRO-SE Series – New Generation of our most popular Aquarium Dual Stage CO2art Regulator.

Completely redesigned with new pressure stabilisation construction. Much larger internal springs are giving safety and precision at the highest level.

Dual stage design minimise increase in output pressure as pressure drops in gas cylinder and will prevent end-tank-dump keeping your aquarium livestock safe and CO2 levels constant.

Replacement for Pro-Series 12V DC Solenoid Coil Replacement – Safe – Low Power – Cool Touch is also availabe.

د.إ599.00 د.إ649.00

co2art regulator
co2art regulator
co2 art pro se
co2art regulator
co2art regulator
co2art regulator

co2art regulator

Co2art regulator Features.

Safe 12V DC Integrated Solenoid Valve
Power adapter with universal voltage 100V-240V
New quality design and completely new construction.
Innovative design provides extreme accuracy and safety.
Integrated Solenoid Valve.
Adjustable working pressure up to +/- 40PSI (3 BAR) which makes excellent product for both Tropical and Marine Aquariums.
Needle valve with bubble counter included.
Dual gauge pressure indicators (tank volume and flow pressure / working pressure)
Due to Two Stages construction compatible with any size CO2 Cylinders.
The thread is made according to UK, Europe, Japan and Taiwan standard (BS341 / DIN477 / W21.8) or CGA320 for North America.

Pro-SE Series Regulator at a Glance

co2art regulator
co2art regulator
A – CO2 cylinder connection nut
B – Working pressure adjustment knob
C – High pressure / CO2 cylinder pressure gauge (displays the amount of CO2 in your cylinder). Please note, for most of the time pressure will be at level of 700-900PSI as CO2 is in liquid state. When gauge will start to drop, that means liquid gas has evaporated and you have from couple hours to couple of days left to change the cylinder (depending on your bubble rate).
D – Low pressure / working pressure gauge
E – Bubble counter with integrated check valve
F – Gas flow (bubble rate) adjustments precision needle valve
G – Solenoid valve compatible with most pH controllers and electric timers


Step 1 | Washer Installation



Place washer between CO2 cylinder outlet and regulator’s stem (inside regulator’s nut)


Step 2 | Tighten the regulator

Tighten the regulator to your CO2 cylinder using a spanner or wrench


Step 3 | Bubble counter installation

co2art regulator
co2art regulator
A – Remove top cap and fill bubble counter with water*
B – Feed tubing through the collar and install cap back onto the bubble counter
*We do not recommend mineral oil as it may contaminate your diffuser.


Step 4 | Pressurising the regulator

A – Open main CO2 cylinder valve
B – Adjust working pressure to desire level* by turning front knob clockwise
1 – Reactors 10-20PSI*
2 – Ceramic and Basic diffusers 20-30PSI*
3 – High pressure atomizers (inline & bazooka) 30-40PSI*


Step 5 | Fine tuning bubble rate

A – Plug the solenoid into a power outlet socket
B – Start turning the needle valve anticlockwise to achieve the desired bubble rate.
Please allow 5-30seconds for pressure to stabilise between adjustments.
Monitor your bubble rate for the first two days and fine tune to achieve desire flow.
Do not adjust the flow right after solenoid is powered up. Please wait at least 30minutes before further adjustments.
After each regulator installation, follow steps from below video to make sure your system is leak-proof.







Have questions? Chat with us..


× How can I help you?