Seachem Ammonia Alert
Ammonia Alert is an innovative color device for continuously detecting and monitoring toxic free ammonia. A sensor changes reversibly from yellow to green to blue, relative to the ammonia concentration. No test kits, chemicals, or procedures are needed.
KEY FEATURES:
- Seachem sensor technology
- Continuously detects and monitors free ammonia
- No test kits, chemicals, or procedures are needed; just constant readings
- Lasts over a year
- Marine and freshwater
د.إ44.00 د.إ49.50
Brand
SEACHEM
Related products
-
TEST KITS, Fresh Water
EASYLIFE PHOSPHATE TEST KIT
Very sensitive and easy to perform Phosphate water test
The very sensitive and accurate Easy-Life Phosphate testkit is suitable for fresh water and marine aquariums. There are two different ranges within the testkit. A low range from 0.00 – 0.10 mg/l (ppm) and high range from 0 – 2.5 mg/l (ppm). The Easy-Life Phosphate water test only needs 1 reagens!
Easy-Life Phosphate PO4 test
- suitable for fresh water and marine aquariums
- easy to use, reliable and ultra sensitive
- colortest, easy to compare with a color chart
- PO4 detectable from 0.01 mg/l (=ppm)
- low range: 0,00 – 0,02 – 0,04 – 0,06 – 0,08 – 0,10 mg/l (=ppm)
- high range: 0,0 – 0,5 – 1,0 – 1,5 – 2,0 – 2,5 mg/l (=ppm)
- testkit accounts for 75 tests
Note: For a phosphate content above 2.5 mg/l (=ppm) the water sample from the aquarium can be cut with water without phosphate (distilled water, RO water or tap water often). The PO4 concentration higher than 2.5 mg/l can be determined.
SKU: TPH 01 -
TEST KITS, Fresh Water
API pH Test Strips, 25 count
Use the API® pH TEST STRIPS as a quick and accurate way to test pH levels in your water. These test strips measure a wide range of pH, from 6.0 to 9.0 ppm, to help you keep aquarium conditions safe for your fish. Product comes with desiccant-lined tube with snap-tight cap, highly precise color chart for accurate water parameter readings, and information on how to correct unsafe water conditions. For use in fresh and saltwater aquariums. Size: 25 pcs per box.
SKU: AI33F -
Sold out!TEST KITS, Fresh Water, Marine
API Nitrate NO3 Test Kit, 90 count
High nitrate levels in your aquarium indicate a build-up of fish waste and organic compounds, resulting in poor water quality and an increase in algae growth. Contrarily, maintaining a low nitrate level improves the health of fish and invertebrates.
Use the API® NITRATE TEST KIT to ensure that the nitrate levels in your tank are safe and healthy for your fish.
The NITRATE TEST KIT reads parameters from 0 to 160 ppm and may be used for both fresh and saltwater aquariums.
Contains 90 tests and includes 2 test solutions, easy-to-ready instructions, glass test tube and color chart.
SKU: AILR1800 -
TEST KITS, Fresh Water
EASYLIFE POTASSIUM TEST KIT
Potassium: at least as important as iron!
Potassium is a macronutrient and at least as important as iron for a good and healthy plant growth. Therefore it is important to check the level of potassium to prevent too low levels and keep them in a healthy range ( 10-15 mg/l). The Easy-Life Potassium test is a color test with a color chart.
Optimum level for a planted aquarium
Aquarium plants benefit from 10 -15 mg/l (=ppm) of potassium. A level below 5 mg/l (=ppm) is not desirable and can lead to growth problems, yellowing of the leafs and deformations, Often lack of potassium is confused with lack of iron, also because potassium was very difficult to measure until now. If the level is too low, extra potassium will help the plants te recover soon and they will color deep green.
- Easy-Life Potassium (K) testkit
- user-friendly and reliable
- color test with color test with easy-to-read color chart
- Measuring range from 0 to 25 mg/l (ppm) Potassium
- 1 testkit accounts for 50 tests
SKU: TPF 01
